22
2.7 Installing the Y-Axis Drag Chain
What you will need
11
Cable Management
36
37
(2) 5mm
Spring Washer
(2) 5mm
Flat Washer
29
(2) M5 x 16mm
Socket Cap Screw
10
(2) Drag Chain Mount
Step 1:
Position the narrow drag chain mount to the rear of
the machine as shown in the diagram. Attach the bracket
with (2) M6 x 10mm socket cap screws.
Step 2:
Install the bracket to the carriage as shown in the
diagram using (2) M4 x 8mm socket cap screws.
Step 3:
Position the drag chain per the diagram using
(6) M4 x 6mm screws. (The side with the Compression
DIN Connector for the spindle goes to the Control Box.)
While mounting the drag chain take care not to damage
any of the cables or connectors.
34
(2) M4 x 8mm
Socket Cap Screw
22
Allen Wrench
Summary of Contents for Genmitsu PROVerXL 4030
