20
2.6 Installing the X-Axis Drag Chain
27
(2) T- Nut M5
What you will need
33
(5) M4 x 6mm
Socket Cap Screw
28
(2) M5 x 8mm
Socket Cap Screw
11
Cable Management
Drag Chain
8
Drag Chain Mount
Step 1:
Per the diagram you will install the X-Axis drag chain
mount. Align the T-Slot nuts with the bracket (the screws and
nuts will be positioned on the top 2 channels of the C-Beam.)
Secure the bracket with the screws.
Step 2:
Position the Drag Chain as shown in the diagram.
Start with securing the side closest to the Spindle Gantry
and secure with (3) M4 x 6mm screws.
Step 3:
Run the Drag Chain underneath the X-Axis limiter
as shown in the diagram and secure to the Drag Chain
Mount with your M4 x 6mm screws.
22
Allen Wrench
Summary of Contents for Genmitsu PROVerXL 4030
