6| SAHP - Installation Manual
V3 June 2021US - SD667052
!
DESCRIPTION
OF THE SYSTEM
3.1
The SAHP heat pump water heater (SAHP) consists of a Solar Assisted
heat pump, coupled with either a 32, 54 or 79 gallon capacity hot
water storage tank. The Solar Assisted Heat Pump is integral to and
positioned on top of the unit within the unit casing.
3.2
The SAHP is designed to heat the domestic hot water within the
tank up to 130
O
°/ i>ÝÕÌi«iÀ>ÌÕÀiÃyÕiVi`LÞÌ i
individual installation, pipe lengths and insulation. It uses an exterior
aluminium panel (evaporator) to absorb energy from the ambient air.
A copper coil(condenser) is wrapped around the external wall of the
inner cylinder which heats the water inside the cylinder. The product
>Ã>ÀiV«ÀV>Ì}V«ÀiÃÃÀvÀµÕiÌ>`ivwViÌ«iÀvÀ>Vi°
With these features the SAHP is designed to have a long, trouble free
life.
3.3
The SAHP has integral safety devices to protect the product from
internal and external faults. An adjustable digital thermostat, locted at
the front of the SAHP controls the water temperature.
3.4
The SAHP is designed to store potable water supplied from the public
mains with a maximum of 200 p/m NaCL.
3.5
The SAHP has a built in timer which once a week heats the water in
the cylinder above 140
O
F to provide pasteurization.
3.6
The SAHP is manufactured in the United Kingdom in an
-"ää£\ÓäääViÀÌwi`v>VÌÀÞ>`ÌiÃÌi`Ì £È£{Ç]1£x]]
CSA.
3.7
SAHP supplies an Installation Kit which contains items that will be
needed on the installation of the SAHP’s refrigeration and plumbing
circuits.
SECTION 3
