SAHP 130, Installation And Maintenance Instructions Manual

Page: 14 / 41

14| SAHP - Installation Manual
V3 June 2021US - SD667052
5.7 Refrigeration Connections
/ i-Ƃ* >Ã>ÎÉn»“>iy>ÀiVœ˜˜iV̈œ˜ˆµÕˆ`œÕ̏iÌ>˜`
ÎÉn»“>iy>ÀiVœ˜˜iV̈œ˜ÃÕV̈œ˜ˆ˜i­>ÃÃii˜ˆ˜w}ÕÀix®]
that connect the SAHP to the evaperator panel.
œ˜˜iV̈˜}ÎÉn»Vœ««iÀÀivÀˆ}iÀ>̈œ˜«ˆ«iܜÀŽ“ÕÃÌLiy>Ài`
>˜`ÃiVÕÀi`ÕȘ}ÎÉn»y>Ài˜ÕÌð/ i i>̫Փ«ˆµÕˆ`“ÕÃÌ
be connected to the corresponding aluminum panel liquid line.
Incorrect orientation WILL result in compressor failure. To help
eliminate leaks, use refrigeration oil on the thread of the
ÎÉn»y>ÀiVœ˜˜iV̈œ˜ÃLivœÀï} Ìi˜ˆ˜}Ì iy>Ài˜ÕÌ°
5.8 Pipework Installation
All refrigeration pipework should be installed in accordance
with ISO 5149.
5.9 The SAHP is factory pre-charged with refrigerant R134a / 513a
ÜˆÌ i˜œÕ} ÀivÀˆ}iÀ>˜ÌvœÀի̜ÓÈvœœÌœv«ˆ«ii˜}Ì i>V
way between the SAHP and the thermodynamic Panel.
Bolt
Double Panel
Single panel L bracket
Nut
Wall
50 mm Spacing
Fig 4
Double panel L bracket
Single Panel
50 mm Spacing
Wall
Bolt Nut
Bolt Nut
REFRIGERATION
INSTALLATION continued
SECTION 5
Fig 5
FRONT VIEW
Liquid line (left hand side)
Suction (gas) line (right hand side)