![background image](http://html1.mh-extra.com/html/sahp/130/130_installation-and-maintenance-instructions-manual_3444266039.webp)
SAHP - Installation Manual
|39
V3 June 2021US - SD667052
SECTION 12
GUARANTEE TERMS
AND CONDITIONS continued
The Guarantee shall be subject to the following conditions:
Its installation shall be carried out in accordance with the
manufacturer’s instructions and in compliance with all the technical
and safety standards applicable whether they are European, national or
DXWRQRPRXVLWVKDOODOVREHXQGHUWDNHQE\TXDOLƓHGVWDII
The Guarantee shall be null and void if any of the following takes
place:
• Incorrect equipment is used for installation.
• The equipment has been installed by staff other than an F Gas
TXDOLƓHGHQJLQHHU
• The equipment has been used for purposes other than those
described in the use and deployment standards or in some way other
than that recommended in the mentioned standards.
• The usage and maintenance instructions have not been complied
with.
• Water supply for the unit that meets some of the following criteria:
Chlorides content > 200mg/L, pH value<6 (scale Sorensen a 25ºC),
Sulphate content > 2000mg/L, Chloride and sulphate content >
300mg/L, CaCO3 content >300ppm. In general water with values
exceeding ceilings set by legislation.
• Absence of security group in the inlet system according to the
legislation.
• System malfunction arising from improper installation of the
hydraulic circuit components and/or buffer tank.
Ř ,QVWDOODWLRQRIHOHPHQWVRXWVLGHWKHVSHFLƓFDWLRQVRIWKHLQVWDOODWLRQ
manual.
• Damage resulting from improper anchoring equipment.
• Unit malfunction due to lack of thermal insulation in the installation
• Incorrect placement of solar panel or box
• The equipment has received an overload of any nature: electrical,
water pressure etc.
• Malfunctions brought about by chance or force majored: atmospheric,
geological phenomena etc.
• The equipment has not been delivered in its original box.
• Damage from atmospheric and external agents: Freezing, dirt,
transport, or accidental impacts.
• Damages derived from an unusual supply of electricity, water or air
(included over pressure and over voltage).
• Damage caused by daily wear in metal or plastic.
• Breakdowns caused by the replacement of parts or elements not
original or authorized in writing by the manufacturer.
• Damages caused by the unusual corrosion of the heat exchanger and/
RUWKHK\GUDXOLFFLUFXLWFDXVHGIURPUHDFWLRQZLWKWKHFLUFXODWLQJŴXLG
• Damages caused from the installation itself.
Ř 'DPDJHGFDXVHGE\YDQGDOLVPDFWVZDUƓUHHWF