![background image](http://html1.mh-extra.com/html/sagola/premium-30/premium-30_instruction-manual_4613794035.webp)
ENGLISH
34/35
ANOMALY
CAUSE
CHECK POINT
REMEDY
The fluid does
not come
out or
insufficient
output
Insufficient air
pressure
Insufficient
air source
pressure
Maintain the air supply
pressure at a suitable
level, but less than 7
bar (102 psi)
Improper
adjustment of
the air pressure
regulator
Adjust the air
pressure suitably
through the
regulator
Blocked fluid
passages
Fluid passages
between the fluid
outlet joint and
the suction pipe
Remove any
obstructions. (*)
The two-way fluid
outlet valve is closed
Open the valve
Condensed fluid
accumulated on the
bottom of the
container
Remove or mix well
Level of the fluid
in the container
too low
Fluid level
The fluid filling
level must be higher
than the inlet
suction pipe. (*)
Fluid viscosity
too high
Fluid viscosity
Dilute the fluid
suitably. (*)
Unstable
fluid output
Insufficient
air pressure
Fluctuating
air pressure
Ensure sufficient air
pressure: eliminate any
other air consumption
that might compromise
the air system
The safety valve
does not relieve
at the pressure
value set
Damaged pressure
gauge
Pressure gauge
reading
Replace. (*)
Damaged or faulty
safety valve
Incorrect relief
pressure
Replace. (*)
Clogged safety valve
Incorrect relief
pressure
Clean with air or
replace (*)
NOTE:
The symbol (*) means that before starting the procedure it is necessary to release pressure (see paragraph 9.1)
Summary of Contents for PREMIUM 30
