MF 9841 SG-FEX2 10 – 2
2)
Remove the screw from the right rear cabinet and remove the
right rear cabinet.
3)
Remove the two screws from the control PWB unit.
4)
Pull out the control PWB unit.
D. Attach the FAX memory.
1)
Install the FAX memory to the socket on the controller PWB as
shown in the figure below so that the memory notch is on the
right side.
E. Attach the interface cable.
1)
Connect the interface cable to the control PWB unit.
[Note] Check that the connector is not obliquely inserted.
2)
Push the interface cable into the recessed portion of the sheet
metal on the control PWB unit.
3)
Fix a snap band with the bundled M3 screw.
F. Attach the control PWB and the right rear
cabinet.
1)
Push the control PWB unit into the main unit and secure it with
the two screws.
2)
Cut out the cut-out portion of the right rear cabinet.
2
Screw
BARCODE
PCL/BUMON
PS KANJI
PROG1
PROG2
FAX IMG EXT
2
3
2
Summary of Contents for MF 9841
Page 89: ......
