MF 9841 SG-FNX3 5 – 4
10) Check to insure that the slide roller is in the rail groove, and
insert the inner finisher.
11) Fix the rear slide rail with the fixing screw (package part No. 8).
12) After pushing the intermediate rail of accuride, insert the fin-
isher slide stopper (package part No. 7) between the rear slide
rail and the accuride.
Fix it with the coin screw (package part No. 10).
13) Install the front open/close cover (package part No. 4) to the
front rail stay rotating shaft, and fix it with the resin clip (pack-
age part No. 9).
14) Fix the punch cover (package part No. 5) together with the
band (metal fixture) with the fixing screw (package part No. 8).
15) Install the front cabinet upper with two screws.
D. Connector Installation
1)
Remove the protection material and fixing tape.
2)
Remove the screw, and remove the connector cover.
1
2
1
2
1
2
Summary of Contents for MF 9841
Page 89: ......
