MF 9841 SG-BPX2 7 – 3
5)
Engage the projection of the main unit frame with the hole in
the right cover plate (package part No. 1), and install the right
cover plate and fix it with the fixing screw A (package part No.
4).
* Be sure to clamp and fix the paper exit tray shifter side plate
with the fixing guide.
6)
Insert the rib of the interface left cabinet (package part No. 2)
into the slit on the lower surface of the scanner left cabinet.
Install the interface left cabinet with the fixing screw A (pack-
age part No. 4) of the paper exit tray which was removed in
procedure 4).
7)
Insert the reverse tray (package part No. 3) along the groove in
the interface left cabinet and the top surface of the right cover
plate.
* When inserting the reverse tray, check to insure that the
switch guide of the reverse tray is up.
8)
Fix the reverse tray with the resin crip (package part No. 5).
9)
Remove the front connection cabinet from the front cabinet
upper, and attach it to the front cabinet upper C (package part
No. 7).
10) Install the front cabinet upper C unit, and fix with the screws.
Summary of Contents for MF 9841
Page 89: ......
