SAGEMCOM MF 9841, Installation Manual

Page: 19 / 90

MF 9841 MF 9626/9631/9841 1 – 16
(4) Copy/Printer color balance density adjustment
(Auto adjustment)
a. Note for execution of the color balance adjustment (Auto
adjustment)
• Be sure to use the recommended paper for color.
b. Adjustment procedure
1) Enter the SIM46-74 mode.
2) Press [EXECUTE] key.
The high density process control is performed, and the copy
color patch image (adjustment pattern) is printed out. (A3 or
11" x 17" paper is automatically selected.)
3) Set the color patch image (adjustment pattern) paper printed in
procedure 2) on the document table.
Place the color patch image so that the fine lines are on the left
side. At that time, place 5 sheets of white paper on the printed
color patch image (adjustment pattern).
4) Press [FACTORY] key on the operation panel, and press
[EXECUTE] key.
The copy color balance adjustment is automatically executed
and prints the color balance check patch image.
If there is any streak or unclear print on the printed check pat-
tern, check the print engine for any problems.
Remark:
(Descriptions on the factory service key button in the color bal-
ance automatic adjustment menu)
There are two kinds of the gamma target for the color balance
automatic adjustment: the factory target and the service target.
FACTORY key and SERVICE key are used to select one of the
above two.
Factory target color balance: Standard color balance
(The color balance can be selected from the three kinds of
fixed ones with SIM63-11.)
Service target color balance: The color balance can be cus-
tomized according to the user's request. (Variable)
When shipping from the factory, the service target gamma data
and the factory target gamma data are the same.
Both are set to the standard color balance when shipping from
the factory. For the service target, a customized color balance
gamma can be registered with SIM63-7.
ǂǂǂ6,08/$7,21ǂǂ12
&/26( 7(67
(1*,1($872$'-8670(176(59,&(
(;(&87(
35(66>(;(&87(@72352&21(;(&87,21$1'35,177+(7(673$7&+
3/($6(86(63(&,),('7<3(2)$25h6,=(3$3(5
)257+,6$'-8670(17
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1($872$'-8670(176(59,&(
(;(&87(
352&21(;(&87,1*
ǂǂǂ6,08/$7,21ǂǂ12
&/26( 7(67
(1*,1($872$'-8670(176(59,&(
3/($6(6(/(&77+(02'()$&725<256(59,&($1'3/$&(
7+(35,17('7(673$7&+21'2&80(17*/$667+(135(66>(;(&87(@
/,*+7$5($$7/()76,'(21'2&80(17*/$66
(;(&87( 6(59,&( )$&725<
;
/
%
$M
3
Ტ/CZᲣ
1 2 0 / . - , + * ) ( ' & % $ #
High density Low density