MF 9841 SG-ETX1/ETX2 3 – 1
MF 9841
Service Manual
[3] SG-ETX1/ETX2
1. Unpacking
A. Removal of the exit tray unit
B. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main
unit.
3)
Disconnect the power plug of the main unit from the power out-
let.
B. Installation of the exit roller unit
1)
Open the right door.
2)
Remove the screw, and remove the connector cover.
No.
Packed part names
Quantity
1
Exit roller unit
1
2
Full detection actuator
1
1
2
<State of switch>
ON
OFF
OFF
1
2
Summary of Contents for MF 9841
Page 89: ......
