20
CHAPTER 7: APPENDICES
1. CONSUMABLES REPLACEMENT
The consumables, ink ribbon and ribbon gauge card are already installed in the machine. You may need to change
these consumables when they become worn. To do so, refer to the instructions in the following paragraphs.
INK RIBBON
The ink ribbon enables the unit to print on normal paper.
Only use an ink ribbon that matches the manufacturer’s specifications. The use of other types of ink
ribbons could result in damage to the main unit and invalidate the warranty. Documents printed by your
unit may be read from the used portion of the ink ribbon. If these documents are confidential, you may
want to remove the ink ribbon whenever you leave the unit.
1
2
Open the front cover: let it swivel round to you until it
remains open.
Open the back cover: unlock the latches (1) before
swiveling the cover round to the back.
3
Remove the worn gauge from its housing.
Position the ink ribbon over its housing under the rear
cover.
Insert the ink ribbon into its housing without removing
the adhesive strip (2):
• position the right end of the main roller onto the
retractable axe.
• position the left end of the main roller onto the left
axe.
!
1
1
2
Liasse 23227796-2A.book Page 20 Mardi, 15. juin 1999 8:44 08
