Sagem LASER PRO 344, User Manual

Page: 33 / 94

Setting your machine
3-3
Op
er
atio
n
Se
ttin
g y
our
ma
ch
in
e
Ge
tti
ng
sta
rt
ed
Direc
to
ry
M
ainte
na
nc
e
Sa
fe
ty
Co
nt
en
ts
Insta
lla
tio
n
Date en cours : 21 juillet 2004
C:\Documents and Settings\baillif\Bureau\LU 251 660 464 A MFL V2 Fax 3440 GB\Setting your machine.fm
Local prefix
This function is used when your fax is installed with a private network, behind a company’s
PABX. It allows you to program an additional automatic
local prefix (to be defined), enabling
you to automatically exit the company’s telephone network system, but only under certain
conditions:
• the company’s internal numbers, where a prefix is not required, must be short numbers less
than the minimal size (to be defined, for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers greater or equal to the mini-
mal size (to be defined, for example France has 10 digits).
Programming your fax with the local prefix consists of two steps:
• defining the minimal size (or equal) of the company’s outside numbers,
• defining the outgoing local prefix of the company’s telephone network. This prefix will
automatically be added as soon as an external number is dialled.
Caution -
If you define a local prefix, do not add it to the numbers stored in the directory, it
will be automatically dialled with each number.
Defining the minimal size and the local prefix
M 252 OK - SETUP / TEL. NETWORK / PREFIX
You can change the default value for the minimal size of the company’s outside numbers
and validate with
OK
. The minimal size will range between 1 and 30.
Enter the outgoing local prefix of the company’s telephone network (maximum
5 characters) and validate with
OK
.
Transmission report
You may print a transmission report for all communications over the telephone network (STN).
You may choose between more than one criteria for printing reports:
•
WITH
: a report is given when the transmission was properly performed or when it is comple-
tely abandoned (but there is only one report per request),
•
WITHOUT
: no transmission report, however, your fax will note all transmissions that took
place in its log (refer to paragraph Logs , page 5-12),
•
ALWAYS
: a report is printed with each transmission,
•
ON ERROR
: a report is printed only if the transmission failed or is abandoned.
With each transmission report from memory, a reduced version of the first page is automatically
reproduced.
To select the report type:
M 231 OK - SETUP / SEND / SEND REPORT
Select the required option
WITH
,
WITHOUT
,
ALWAYS
or
ON ERROR
and confirm your
choice with
OK
.