5 - Configuration
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication
document. Reproduction and disclosure prohibited
Page 5-11
RFC1483 Routed
Field
Meaning
Network Setting
Enable NAT
: Check the appropriate box to enable address
translation (NAT) (
Recommended
).
Enable DHCP
: Check the appropriate box to activate the
modem/router's "DHCP client" function.
WAN IP Address
This field is active only when the "DHCP client" function is deactivated
(Enable DHCP field check box not checked).
Enter a WAN IP address.
WAN Subnet Mask
This field is active only when the "DHCP client" function is deactivated
(Enable DHCP field check box not checked).
Enter a WAN subnet mask.
PPPoE
Field
Meaning
Network Setting
Enable NAT
: Check the appropriate box to enable address
translation (NAT) (
Recommended
).
Authentication
Select one of the proposed authentication modes (CHAP or PAP).
User Name
Enter the user name (32 characters maximum) supplied by your
I
nternet
S
ervice
P
rovider (ISP).
Password
Enter the password (32 characters maximum) supplied by your
I
nternet
S
ervice
P
rovider (ISP).
Dialling
Select:
AUTO
: The PPPoE link will be set up only if there is traffic on the
ADSL line.
DIRECT
: The PPPoE link will always be set up even if there is no
traffic on the ADSL line.
Select
DIRECT
(
Recommended
).
Idle timeout (min)
Enter a delay (expressed in minutes) after which the PPPoE link will
disconnect in the absence of Internet traffic.
