Sagem F@ST 1200 User Manual Download Page 13

Page: 13 / 82

2 - Description

SAGEM F@st™ 1200/1240 User Guide - 252569421-01

Sagem Communication

document. Reproduction and disclosure prohibited

Page 2-3

2.1.1 LEDs

The various LEDs in the figure above are described in the table below:

LED

Meaning

PWR

Power supply presence

This LED is

lit

when power supply is present.

USB

Activation / Activity on the USB link

This LED is

lit

when the USB interface is active.

This LED is

off

when no traffic is detected.

ETH

Ethernet link

This LED is

lit

when the ETH interface is active.

This LED

blinks

in pace in with the traffic.

This LED is

off

if no traffic is detected.

LINE

ADSL line activation

This LED

blinks slowly

when the ADSL line is being synchronized,

This LED is

lit

when the ADSL line is synchronized.

Summary of Contents for F@ST 1200



















































































Search results

Summary of Contents for F@ST 1200

Reviews:

Related manuals for F@ST 1200

Brands by name

Popular brands

Sagem F@ST 1200, User Manual

Search results

Summary of Contents for F@ST 1200

Reviews:

Related manuals for F@ST 1200

Brands by name

Popular brands