Sagem F@ST 1200 User Manual Download Page 45

Page: 45 / 82

5 - Configuration

SAGEM F@st™ 1200/1240 User Guide - 252569421-01

Sagem Communication

document. Reproduction and disclosure prohibited

Page 5-9

Field

Meaning

Protocol

Displays the protocol supplied by your

nternet

ervice

rovider (ISP).

Five possible cases:

RFC1483 Bridged

: Bridged.

RFC1483 Routed

: Routed.

PPPoE

: PPP over Ethernet.

PPPoA

: PPP over ATM.

MER

ncapsulated

outed.

Upstream

Displays the upstream rate of the ADSL line (expressed in
kbit/s).

Downstream

Displays the downstream rate of the ADSL line
(expressed in kbit/s).

Firmware version

Displays the modem/router firmware version.

ADSL code version

Displays the ADSL code.

F@st1200 Setup version

Displays the configuration application version.

No field on the screen can be modified.

Summary of Contents for F@ST 1200



















































































Search results

Summary of Contents for F@ST 1200

Reviews:

Related manuals for F@ST 1200

Brands by name

Popular brands

Sagem F@ST 1200, User Manual

Search results

Summary of Contents for F@ST 1200

Reviews:

Related manuals for F@ST 1200

Brands by name

Popular brands