manualshive.com logo in svg

Sagem F@ST 1200, User Manual, Page: 28 / 82

Share
Download
Sagem F@ST 1200 User Manual Download Page 28

3 - Installing your modem/router

SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 3-10

Sagem Communication

 document. Reproduction and disclosure prohibited

3.2  Installing and configuring your modem/router on your

computer's USB port

3.2.1 In 

Windows

The 

USB

 port of the SAGEM F@st™ 1200/1240 is a USB 1.1 port supporting a maximum bit

rate of 12 Mbit/s. The connector is type B.

On this port, you can connect directly to a computer with a type A USB port using a USB lead
(supplied with the equipment).

Do not connect the USB lead until prompted by the installation procedure (that is,
after installing the drivers).

The 

installation

 procedure described below was performed in

Windows

 XP

. Installation in other Windows

 operating systems (98,

ME and 2000) may present slight differences.

1

Insert the CD-ROM in your computer's
appropriate drive; the screen opposite
appears.

Carry out the operations described on
screen.

Click the 

 button to

continue installation.

Note:

 If this screen does not appear: Select 

Start

, then 

Run

, then enter:

"<CD-ROM drive letter> :\

[email protected]

 then click 

OK

.

Summary of Contents for F@ST 1200



















































































Reviews:

No comments