Sagem D70V User Manual Download Page 85

Page: 85 / 104

At the end of the playback, a confirmation screen asks you if you want to

keep this new outgoing message. Press Yes

to keep your OGM or

to record it again.

Using a pre-recorded anonymous OGM

On the navigator key

, press

until the Ans. Mach screen is

displayed. Press OK to confirm.

Select Outgoing msgs. Press Confirm

Select Anonymous using

. Press Confirm

Press Yes

to replace your personal outgoing message with the

anonymous outgoing message.

The anonymous outgoing message for the answering machine mode used
(answer only/answer and record) is automatically played back.

Deleting all your personal OGMs

On the navigator key

, press

until the Ans. Mach screen is

displayed. Press OK to confirm.

Select Outgoing msgs. Press Confirm

If you select the anonymous mode, your personal outgoing
message will be definitely replaced by the pre-recorded outgoing
message. You will however be able to record a new personal
outgoing message (see previous paragraph).

If you delete all your personal outgoing messages, the answering
machine will automatically be deactivated.

You want to

keep OGM?

Yes

Answ.&record

Outgoing msgs

Delete all

Return

Confirm

Anonymous

Play

Outgoing msgs

Do you want the

anonymous OGM?

Yes

Anonymous

NSWERING

MACHINE

Livre du MD+.book Page 81 Mercredi, 31. mars 2004 1:57 13

Summary of Contents for D70V









































































































Search results

Summary of Contents for D70V

Reviews:

Related manuals for D70V

Brands by name

Popular brands

Sagem D70V, User Manual

Search results

Summary of Contents for D70V

Reviews:

Related manuals for D70V

Brands by name

Popular brands