Sagem D70V, User Manual

Page: 56 / 104

52
Modifying the base code
The base code (0000 being the default setting) is required to access
certain security functions. It must be composed of 4 digits.
On the navigator key , press or until the Security screen is
displayed, press OK to confirm.
Select Change Code using or . Press Confirm .
Enter the old base code using the keypad. Press Confirm .
Enter the new base code using the keypad. Press Confirm .
Enter the new code again. Press Confirm .
To exit the menu, press the red key .
Defining the call time limit
You can set your telephone's operating time. Once the call time limit is
used up, it is no longer possible to make calls or send SMS.
To be able to call again, you will have to deactivate the call time limit or set
a new limit.
On the navigator key , press or until the Security screen is
displayed, press OK to confirm.
Carefully note down the base code number. You will need this
code to change certain settings.
If the time limit ends during a telephone conversation,
communication will not be cut off. Once you have hung up, it will
not be possible to make a new call. Calls between handsets
(internal calls) are not affected by the call time limit.
OK
Emergency
Return Confirm
Change Code
Secutity
Time limit
Old code :
Return
Base code
<Enter code>
New Code :
Return
Base code
<Enter code>
S
ECURITY
Livre du MD+.book Page 52 Mercredi, 31. mars 2004 1:57 13