72
S
ETTINGS
A
DVANCED
SETTINGS
/ B
ASE
SETTINGS
Using a handset to put the base in registration mode
This function enables you to put the base in registration mode so you can
register a new handset. To do so, the handset to be registered must be in
registration mode (Refer to paragraph Registering a new handset to a
base, page 67).
On a handset that is already registered the base in question, press
or
until the Settings screen is displayed, press OK to confirm.
Select Adv. Settings using
or
. Press Confirm
.
Select Base Settings using
or
. Press Confirm
.
Select Registr. Mode using
or
. Press Confirm
.
A screen prompts you to confirm the setting of the base to the registration
mode. Press Yes
to enter the registration mode. The indicator light on
your base starts to quickly blink green.
Your base will remain in registration mode for about 1 minute.
You can also use the base buttons to put the base in registration
mode:
•
If your base is equipped with an answering machine: Press
simultaneously on the two top buttons on the base for a few
seconds
•
If your base is not equipped with an answering machine:
Press on the
button on the base for a few seconds.
OK
HS Settings
Return
Confirm
Base Settings
Adv. Settings
Line Settings
OK
Base name
Return
Confirm
Registr. Mode
Base Settings
Reset Base
Livre du MD+.book Page 72 Mercredi, 31. mars 2004 1:57 13
Summary of Contents for D70V
Page 1: ...Livre du MD book Page 1 Mercredi 31 mars 2004 1 57 13...
Page 101: ...MEMO...
Page 102: ...MEMO...