Sage Fast Slow Pro, Quick Manual

Page: 9 / 148

9
EN
COOKING BOWL CAPACITY
• Always ensure proper liquid / food level in the
removable cooking bowl.
• ‘MAX’ level – Do not exceed the maximum
fill level. Overfilling may cause personal injury
or property damage or affect the safe use
of the cooker.
• ‘½’ level – When cooking foods that expand
(such as dried vegetables, beans, grains, rice,
etc.) DO NOT fill past the middle fill level.
• ‘MIN’ level – Make sure the removable cooking
bowl is filled to at least the minimum fill level to
ensure proper operation and to avoid thermal
damage and fire.
NEVER FORCE THE LID CLOSED.
CLOSING THE LID
• Make sure the silicone lid seal is properly
inserted around the wire ring on the underside
of the lid and that the safety locking pin
moves freely.
• Lower the lid into the closed position. Turn the lid
knob clockwise towards the closed lock graphic.
The lid should close and lock into place with
ease and minimal effort. DO NOT STRAIN OR
FORCE THE LID TO CLOSE. The cooker alert
will sound when the lid locks.
OPEN CLOSE
• Always ensure the safety locking pin is properly
aligned within the opening of the lid arm and is
not restricted in any way.
IMPORTANT SAFETY INFORMATION FOR
YOUR FAST SLOW PRO
™
This appliance cooks under pressure and must be operated and
maintained as described in this book. The trapped air pressure
inside the pressure cooker may cause a hazardous situation
if not operated and maintained as described in this manual.
NOTE
If the contents of the cooker are hot when closing
the lid, it may be necessary to press down slightly
on the lid knob while the lid is still in the unlocked
position, allowing the lid to turn easily.
HANDS-FREE STEAM RELEASE
The cooker features automatic hands-free steam
release that will occasionally release steam as the
cooker pressurises as well as automatically start
the steam release cycle after cooking.
• Never place your hands, arms or face over
the pressure release valve.
In addition to the automatic hands-free steam
release, pressure can be released by pressing
the RELEASE button or by manually turning
the pressure release valve.