![background image](http://html1.mh-extra.com/html/safire/gf-1070rdr/gf-1070rdr_user-manual_3400707005.webp)
Important Safety Information
(Continued)
•
Prior to fire table operation, check the hose for evidence of excessive abrasion or wear. If
the hose is damaged, cracked or cut, it must be replaced before using the gas fire table. The
hose assembly can only be replaced with a hose assembly specified by the manufacturer.
•
Before each use, remove the lava rocks. Examine the burner and its components. If dirty, clean with
a soft brush and soapy water solution. Also examine the area around the burner. Any dirt or
foreign material, such as spider webs or nests in this area should be removed. If it is evident
that the burner is damaged, the fire table must not be used. The burner assembly must be
replaced.
• Place the hose out of the pathways where people may trip over it. Do not place the hose in
areas where it may be subjected to accidental damage.
•
The appliance should be limited such that accessibility to the flame is minimized if the
appliance
is not fitted with a guard.
!
DANGER
This outdoor fire table is for use with L P G a n d n a t u r a l gas only. The conversion to or
attempted use of natural gas in this outdoor fire table is dangerous and could result in
serious personal injury, or property damage.
ATTENTION: Any alteration of the outdoor fire table that is not specifically
directed in the operations manual will void manufacturer warranty.
LP GAS
Dangers And Warnings
LP gas is fl ammable and hazardous if handled improperly. Become aware of the characteristics
before using any LP gas product.
LP GAS WARNINGS
• Cylinders must be stored outdoors in a well-ventilated area out of reach of children.
• Disconnected cylinders must have threaded valve plugs tightly installed and must not be
stored in a building, garage or any other enclosed area.
• Never use a LP cylinder with a damaged body, valve, collar or footing.
• Dented or rusted LP cylinders may be hazardous and should be checked by your
LP gas supplier.
Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure)
and the adjustment of appliance are compatible.
appliance shall be connected in accordance with national regulations
5