background image

Propane  (LP)  Dangers  And  Warnings

 

(Continued)

 

 

 

 

• LP gas tank must be arranged for vapor withdrawal. 

• The LP gas tank must have a tank collar to protect  the tank valve.

 

• The LP gas tank should not be dropped  or handled roughly.

 

• Tanks must be stored outdoors  out of the reach of children. Do NOT store in a building, 

garage, or  any  other   enclosed area.

 

• Never store your LP gas tank where temperatures can reach over 125°

F.

 

• Do not store the LP gas cylinder  in direct sunlight or near a source of heat or combustion.

 

• Never keep a filled LP gas tank in a hot car or car trunk. Heat will cause the gas pressure to 

increase, which  may  open  the  relief  valve  and  allow  gas  to  escape.

 

• Place  dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of

 

dust  cap  on  the  LP gas  tank  valve  

outlet that is provided with 

the  LP gas  tank  valve.  Other 

types  of  caps  or  plugs may  result in  leakage  of  propane.

 

a. Do  not  store a spare  LP gas  cylinder under  or  near  this  appliance. 
b.  Never fill  the  LP gas  cylinder beyond 80%  full.

 

c. If  the  information in  (a)  and  (b) is not followed  exactly, a fire  causing  death  or  serious 

injury  may  occur.

 

• LP gas cylinders should be filled only by a certified  LP gas dealer.

 

• 

Use the regulator that it shall comply with the EN 16129. 

pressure.

 

• Never attempt to attach this appliance  to the self-contained  LP gas system of a camper trailer,

 

motor home or  house.

 

• Always use the pressure regulator and hose assembly provided  with the appliance  to connect 

to  a LP gas  cylinder. Never connect to  an  unregulated LP gas  supply.

 

• Hand turn the manual gas control  valve. Never use tools. If the valve will not turn by hand, do not  try  to

 

repair it.  Call  a Certified Gas Technician.  The  use  of  force  or  any  self  attempted  repair   may  result 
in  a fire  or  explosion.

 

 

Connecting your  gas cylinder:

 

 

Before  connection, be  sure  that there  is no  debris  caught   in  the  head  of  the  gas  cylinder,  head 

of  the  regulator valve  or  in  the  head  of  the  burner  and  burner  ports.  Connect regulator  valve 
and  hand-tighten  firmly. Disconnect the  propane cylinder from  the  regulator valve  when  the 
fire table is not in use. DO NOT obstruct  the flow of combustion  air and ventilation air to the

 

burner.

 

 

Lava  Rock  Warning:

 

1.  Do  not  light  or  use  this  firetable if  lava  rocks  are  wet.  Ensure  lava  rocks  are  completely dry 
before lighting. Intense  heat  can  cause  wet  lava  rocks  to  explode and  they  could  hit 
someone causing injury.

 

2. Please  keep  away  from  the  firetable for  at  least  20  minutes during initial  start-up as lava 
rocks  could  retain  some  moisture from  manufacturing and  shipping.

 

 
 

 

6

 

Summary of Contents for GF-1070RDR


















Reviews: