background image

RELEASED

3-30-12

REFERENCE

 

NUMBER

INS001114

40429 Brickyard Drive • Madera, CA 93636 • USA

559.438.5800 • FAX 559.438.5900

www.bklighting.com • [email protected]

B-K LIGHTING

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY 
DESCRIBE.  REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

CK™/OL™/SM-DE™ 

Architectural Surface Installation

IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION INSTRUCTIONS

Warning

Flammable

Hot Surface

TOOLS

NEEDED:

By Others

5/32” Allen wrench

Phillips screwdriver

Wire connectors

(recommended silicone filled wire connectors)

• 

Product must be installed by a qualified person in a manner 

consistent with its intended use and in compliance with the 
National Electrical Code, Canadian Electrical Code, and all Local 
and Provincial Codes. 

• 

Follow product label information and instructions.

• 

Qualified Personnel must perform all servicing or relamping of 

this product.

• 

Before wiring to power supply and during servicing or relamping, 

turn off power at fuse or circuit breaker before service.

• 

The use of accessory equipment not recommended by the 

manufacturer or installed contrary to instructions may cause an 
unsafe condition. The use of damaged components may cause 
an unsafe condition and void product warranty.

IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY 

AND INSTALLATION INSTRUCTIONS

• 

Do not block light emanating from product in whole or part, 

as this may cause an unsafe condition.

• 

Never operate the fixture with missing or damaged lens. 

Lens must be cleaned on regular basis.

• 

Entire fixture may become extremely hot. Do not touch hot 

lens or fixture body. Do not touch the lamp at any time. Use 
a clean, dry, soft cloth to handle the lamp. Oil from skin may 
damage the lamp and cause it to rupture.

• 

Replace lamp only with correct wattage and type of lamp 

marked on fixture label.

• 

All gaskets, o-rings and sealing surfaces must be kept clean 

during installation and service; failure to do this may cause an 
unsafe condition and void product warranty. 

INSTRUCTIONS PERTAINING TO 

A RISK OF FIRE, OR INJURY TO 

PERSONS IMPORTANT SAFETY 

INSTRUCTIONS

Lighted lamp is HOT!

WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS: 

Turn off/unplug and allow to cool before replacing lamp. 

Lamp gets HOT quickly! Contact only switch/plug when 

turning on. 

Do not touch hot lens, guard, or enclosure (see diagram/

picture). 

Keep lamp away from materials that may burn. 

Do no touch the lamp at any time. Use a soft cloth. Oil 

from skin may damage lamp. 

Do not operate the luminaire fitting with a missing or 

damaged shield.  

SAVE THESE INSTRUCTIONS

• Suitable for wet locations   

REMOTE WIRING

LED Driver

Remote driver installations require inter-connected 
wiring between the LED and driver (by others). Drivers 
have specific wiring requirements between these 
components. Driver manufacturers regularly recommend 
the following wiring details for such installations:

•  Do not exceed 50 foot overall wiring distance 

using 12 gauge copper wire.

Failure to comply with specific wiring 

requirements will void product warranty.

SM-DE

OL

This set of instructions works for:

CK 

- Catskill™

OL - 

Olympic™ 

SM-DE

 - Denaii Surface 

Downlight™

CK

Universal Ring

18 Gauge Wire

Reviews: