SAFI VISION AS 300, Manual Of Instructions For Installation Use Maintenance

Page: 15 / 94

LIFT MODEL VISION AS 300 Rev001 2-3
•
Obligation to charge the maintenance of the equipment to a person formed and
responsible for this.
2.5 Rules references
•
D.L. 19.09.94, N. 626 - Actuation of the 89/391/CEE, 89/654/CEE, 89/655/CEE,
89/656/CEE, 90/269/CEE, 90/270/CEE, 90/394/CEE and 90/679/CEE directives
concerning the improving of the workers’ safety and
health conditions on the
working place.
•
D.P.R. 07.01.56, N.164 - Rules for the accidents prevention at work in the building
sector.
•
D.P.R. 27.04.55, N.547 - Rules for the accidents prevention at work.
•
Pr EN 12159 - Building hoists for persons and materials.
•
EN 292-1, Machinery safety - Fundamental concepts, general principles of
projecting - Part 1: Terminology, basic methodology.
•
EN 292-2:1991 + A1:1995, Machinery safety - Fundamental concepts, general
principles of projecting - Part 2: Specifications and technical principles
•
EN 294:1992, Machinery safety - Safety distances to keep in order preventing the
reach of dangerous zone with the upper limbs.
•
EN 349, Machinery safety - Minimum room to avoid the squashing of parts of the
body.
•
EN 418: 1992, Machinery safety - Emergency stop devices, functional aspects -
Principles of projecting.
•
EN 811, Machinery safety - Safety distances to keep in order to prevent the reach of
dangerous zone with the lower limbs
•
EN 894 -1, Machinery safety - Ergonomic requirements for the information and
control devices projecting - Part 1: General principles for human interactions with
information and control devices.
•
EN 953, Machinery safety - Safety guards - General requirements for the projecting
and construction of fix and movable guards.
•
EN 954-1:1996, Machinery safety - Parts of the control system connected to safety -
Part 1: General principles of projecting.
•
EN 1037 Machinery safety - Prevention of unexpected starts.
•
EN 1088, Machinery safety - Interlocking devices combined to safety guards.
projecting and choice principles.
•
EN 60204-1:1997, Machinery safety - Electric equipment of machines - Part 1:
General rules (IEC 60204-1:1997).
•
EN 60204-32, Machinery safety - Electric equipment of machines - Part 32:
Requirements for hoisting devices 1 (EC 60204-32:1998).
•
EN 60529, Guide on wraps protection (IP Code) (IEC 60529:1989).
•
EN 60947-4-1, Low-voltage equipment - Part 4-1: Counters and starters -
Electromechanical counters and starters (IEC 60947-4-1:1990).
•
EN 60947-5-1:1997, Low-voltage equipment - Part 5-1: Control circuit devices and
maneuver elements - Electromechanical devices for control circuits (IEC 60947-5-
1:1997).
•
ISO 3864, Safety colors and safety symbols.
•
ISO 4302, Hoisting equipment. Wind loads.