LIFT MODEL VISION AS 300 Rev001
10-9
By
pressing
the
rise/descent push-button
the elevator does not
move
The phases have been inverted
Invert the phase by operating
on the plug fitted on the electric
panel
Total current failure
Check and be sure that the
control electric panel is live
Some limit switches have tripped
Inspect
the
following
limit
switches:
a) rise limit switch
b) descent limit switch
c) door closing control limit
switch
d) vertical element presence
controlling limit switch
During the rise/descent
you
can
hear
hum
emitted by the electric
motors
Humidity in the safety system electro-magnet
Operate
repeatedly
the
rise/descent
lever.
If
the
problem persists replace the
electro-magnet.
When the push-button
during the descent is no
longer
pressed
the
elevator does not stop
immediately and instead
the
emergency
brake
gets activated)
The electro-magnetic brake of the electric
motor is worn or it has lost power
Call immediately the closer
assistance point in your area or
the manufacturer
During
the
rise
the
machine does not stop,
but instead, by pressing
the
descent
lever
descends
The limit switch which controls the vertical
element presence has been
activated. Set the limit switch
appropriately
Table 10 : Inconveniences to the electric installation
ATTENTION:
All intervention on the electric installation must be carried out by
qualified personnel only obeying the safety rules over the electric
installations, in order to avoid accidents and injuries to the
operators!
Summary of Contents for VISION AS 300
