29
arm/disarm methods in "Arm/Disarm Operation" to arm the alarm host and to ensure
the system is on alert.
The alarm host will automatically alarm according to the pre-set alarm
procedure as soon as someone breaks into a defense area.
Emergency Alarm (or Help)
If any emergency circumstance such as robbery occurs in your residence or
workplace, the system will enter into alarm mode whether the alarm host is in arm
mode or in disarm mode when pressing the “Emergency Button” key on the remote
control panel or pressing corresponding alarm switch.
Trigger the Alarm System in the Shielded Defense Zone
When any defense zone is set to shielded defense zone, if an alarm is triggered
in this zone, all defense zones except for emergency defense zones will be shielded,
and the alarm host does not sound an alarm when any alarm is triggered in other
defense zones.
3.
3.
3.
3.
Alarm
Alarm
Alarm
Alarm Receiving
Receiving
Receiving
Receiving Operation
Operation
Operation
Operation
In phone alarm mode, upon receipt of alarm call, you can hear a 5-second siren
or record after picking up the phone. At this time, users can selectively enter the
following commands through the phone keyboard:
1 #
Arm (Set to Full Arm)
2 #
Disarm
3 #
Activate on-site siren at the maximum volume level
0 # 0 #
Exit Alarm Receiving Mode
For example: Once receipt of alarm phone, you can hear 5-second siren or
record after picking up the phone. Enter 1 # through the keyboard of the alarm
receiving phone to rearm the host. Enter 2 # to exit on-site alarm mode to enter into
disarm mode in which other informed phone numbers can not dialed. Enter 3 # to
activate on-site siren at the maximum volume level. Enter 0 # 0 # to exit alarm
receiving mode, and then the alarm host will cut off phone line. If you can not
perform any valid operation within 30-second wait time, the alarm host will
automatically cut off phone line and then continue to dial other groups of informed
