18
Reasons
Reasons
Reasons
Reasons for
for
for
for Failing
Failing
Failing
Failing to
to
to
to Learn
Learn
Learn
Learn Codes
Codes
Codes
Codes
Coding Redundancy: If the wireless code currently required to be learned by
the alarm host has exited in the alarm host, that is, this code has been learned by
the alarm host, it can not be learned again by the alarm host. If the alarm host
requires learning this code, the existing code in the alarm host shall be deleted.
Wrong type of wireless code: Any of the following cases would lead to
failure to learn code: The code of detectors is transmitted when the alarm host
learns code with remote control, or the code of remote control is transmitted
when the alarm host learns code with detectors. Besides, detectors generally can
transmit 7 types of special codes respectively related to Low Voltage, Low
Voltage Recovery, Anti-tamper, Invalid Operation, Invalid Operation Recovery,
Light Disturbance, Light Disturbance Recovery. Before detectors transmit any
code, please confirm if codes transmitted by detectors are normal codes, because
special codes are not learned by the alarm host.
VII.
VII.
VII.
VII. How
How
How
How to
to
to
to Program
Program
Program
Program Alarm
Alarm
Alarm
Alarm Host
Host
Host
Host
1.
Programming Precautions
①
During programming set-up, user alarm host shall be kept under disarm
mode as much as possible to prevent alarm signals from triggering an
interrupt.
②
At every step of set-up, the alarm host will give out voice prompt.
During voice prompt, any input is invalid. Please enter a command after
voice prompt. During set-up, if any input is wrong, please enter“0#” to cancel
operation and return to the previous step.
2.
Factory Default Settings
1)
User Password: 123456
2)
Set-up Password: 112233
3)
Alarm Mode: On-site Alarm Mode
4)
Siren Volume: Max.
5)
Playing Content: Siren
