24
SL6+ v.3.30 EN
Configuration
SafeLine emergency telephone units
Example 1.
Storing of two different telephone numbers, one to be an-
swered by P100 code and the other one with voice. (For test
facility, see example 2.)
Configuration
examples
If at any time you need to start
over, use the factory reset
command *99*1#.
Please refer to the full configuration
setup in the “Parameter list” as
these are merely examples.
Start configuration:
1st phone number:
2nd phone number:
Call type 1st number:
Call type 2st number:
Alarm button delay:
End configuration:
Example 2.
SLCC (SafeLine Call Centre) and 3 day test.
Start configuration:
Enter P100 ID code
Set test alarm type:
Set number of days between test alarm:
LMS phone number:
Test alarm:
End configuration:
- Example: 3 seconds delay.
- Example: Answered as voice call.
- Example: Answered with P100 code.
- Example: 3 days between test alarm.
- Example: Test alarm type P100.
Lift ID code (each lift must have its own unique code).
(Only if using SLCC)
(For more information, please refer to parameter *17*
in the ”Parameter list”)
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
