© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2
Title of Document
p. 26
Verifying Calibration
6. Power down the unit. Remove SD card and power up unit once again. The monitor should display the calibrated 360°
image along with the front, right, left or rear images.
7. Cycle the various camera views with the
AVM push button
.
8. Put the vehicle in reverse. The monitor will display the rear camera along with the guide lines automatically.
Calibration Image Test
To verify the accuracy of the AVM calibration, use tape to create 2 lines, one on each side of the vehicle. Place each tape
a distance of ½ the vehicle’s width away from the vehicle. Alternately, you can do this by moving the vehicle to a parking
spot with painted lines.
Looking at the in-cab monitor, the AVM should render
2 straight vertical lines
. If the lines are bent or warped, then the
image needs to be calibrated once again. Either adjust the camera positions, or move the pads, then repeat the calibration
procedure. If this does not solve your problem, please contact Seon Support for assistance.
Vertical lines
as rendered by
the 360 image
