© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2
Title of Document
p. 19
Performing AVM Calibration
Performing AVM Calibration
Once you’re done entering your vehicle data and setting your pixel pitch values, you’re ready to begin calibrating the
individual cameras.
Calibrating the 4 cameras
1. Click the
Vehicle Pattern Info
tab
2. Choose your
AVM-221
as your model.
NOTE: Choosing correct AVM
You must choose AVM-221 for calibration to work properly.
3. Switch to the
AVM Calibration
tab, then click
Open
to load your camera files. Navigate to the location of your
calibration tool, select the OUTPUT folder, and click Select Folder. The front camera image will display on the screen.
Notice that the FRONT.bin image is selected.
