10
XL-TG10153BM-en-US Rev A · 2013-06-27 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Frame Preparation
Figure 10
Figure 9
Flush Mount
Failure to properly engage the vehicle
parking brake prior to installing the
liftgate may allow vehicle movement
which, if not avoided, could result in
death or serious injury.
NOTE:
Prior to installation verify the vehicle rear doorsill
will support required loads.
1. Remove bumper, step, or any protrusions that would
prevent deck extension from being mounted flush
against the rear doorsill.
2. Follow the frame cutout requirements for your preferred
installation
(Figures 9 or 10)
.
NOTE:
Flush Mount: Deck extension replaces the rear sill
and is mounted flush with the rear frame posts
(Figures 9 or 10).
FLUSH MOUNT
TRUCK INSTALL
FLUSH MOUNT
TRAILER INSTALL
POST
33" (787 mm)
(FOR 48" AND 52"
[1244 and 1320 mm] PLATFORMS)
40" (1016 mm)
(FOR 61" [1549 mm] PLATFORM)
POST
5.38"
(136 mm)
8"
(203 mm)
33" (787 mm)
(FOR 48" and 52"
[1244 and 1320 mm] PLATFORMS)
40" (1016 mm)
(FOR 61" [1549 mm] PLATFORM)
5.38"
(136 mm)
8"
(203 mm)
12"
14" (FOR 61" [1549 mm]
PLATFORMS)
12"
14" (FOR 61" [1549 mm]
PLATFORMS)
