7
1. Working Mode Display
: It shows the currently selected working mode. There are three working modes: APEX, ENDO and
APEX+ENDO (combination).
2. Automatic Reverse Display
: It shows the selected automatic reverse direction mode.
3. Special function of Working Mode
: When using the ENDO and APEX+ENDO mode, programs 8 and 9 are in reciprocating mode and “Reciproc”
is displayed.
In APEX+ENDO mode, displays the set status when using the Start/Stop and Slow Down functions.
4. Program Number Display
: It shows the selected program number.
5. Apex length Display / Load Display.
: In APEX, APEX+ENDO mode, it displays the length of the apex length. In ENDO mode, it shows the load condition
of motor during operating.
6. Speed Display
: It shows the preset RPM.
In reciprocating mode (programs 8 and 9), the currently set angle is displayed when selecting the forward
or reverse rotation angle. Except when selecting rotation angles, 350 RPM is displayed.
7. Rotary Direction Display
: It shows the selected rotary direction.
In reciprocating mode (programs 8 and 9), the forward or reverse icons flash when selecting the forward
or reverse rotation angles.
8. Torque Display
: It shows the preset torque.
9. Gear Ratio Display
: It shows the selected gear ratio.
10. Battery Display
: There are three bars which indicate battery power and if the battery bar is less than one level, the battery
have to be recharged.
11. System volume display
: It shows the system volume value.
LCD WINDOW
11
10
7
6
8
5
2
4
1
3
9
