6
BUTTONS ON THE OPERATION PANEL
Power Button
: Push the power button over the 3 seconds, power is turned on/off.
Apex/Endo Button
: Use for selecting the apex or the endo mode.
Auto Reverse Button
: Use for setting the automatic reverse mode. Three modes can be selected.
Operation Direction Button
: Use for selecting the rotary direction. The beep sound is heard during rotation in reverse direction.
In Reciprocating mode, use for selecting forward or reverse rotation when changing the rotation angle.
Gear Ratio Button
: Use for setting the gear ratio.
Speed/Rotation Angle Button
: Use for setting the speed(RPM).
Press and hold the button, can set the speed.
In Reciprocating mode, use for changing the rotation angle.
Torque Button
: Use for setting torque.
Press and hold the button, can set the torque.
Program Button
: Use for selecting the program number.
Press and hold the button, can set the program.
Apical Line Button
: Use for setting apical line. The default is 0.5.
Press and hold the button to set the AUTO START/STOP, AUTO SLOW DOWN functions.
Volume Button
: Use for changing system volume value.
