13
- Foot Controller is ON/OFF switch. Intensity is not controlled.
ON/OFF Button
- The F/R icon blinks when setting the angle, and the setting value is saved if there is
no button operation for 4 seconds.
- Power is off after 10 minutes without operation.
However power is not off automatically during the motor operation even without use.
5. Set the rotary direction by pressing the operation direction button.
6. Motor is operated by pressing the motor button or the foot controller.
Motor Button is, of motor, the motor stop operation by pressing the motor button once more
Motor operation can be controlled by pressing and releasing the foot controller.
7. After use, place the handpiece on the motor stand, turn off the control box by pressing the power button
over the 3 seconds after operating.
<RECIPROCATING>
- The motor reciprocates rotation in the forward and reverse directions according to each set angle ratio.
① Press to enter the Reciprocating Mode in program 8 and 9.
② Press to set the angle ratio (30°, 60°, 90°, 120°, 150°, 180°, 210°, 240°, 270°).
③ Press to set the opposite direction.
④ Press to set the angle ratio (30°, 60°, 90°, 120°, 150°, 180°, 210°, 240°, 270°).
