Saeco Magic Roma SUP 013, User'S And Maintenance Booklet

Page: 15 / 55

CONTROLS AND MACHINE PARTS UNPACKING/INSTALLATION
Unpacking/Installation
The original packing has been designed and
manufactured to protect the machine during
transport. Keep it for transport or return ship-
ping.
Before installing the machine, follow the follow-
ing safety precautions:
Position the machine in a safe place.
Do not allow children to play with the machine.
Make sure the machine is not placed nearby hot
surfaces or open flames.
Now the machine is ready to be connected.
Power supply connection
Warning: electric current may cause death!
Always keep to safety indications.
The coffee machine must be connected to an
A/C socket. Voltage must suit to the voltage
specified on the appliance rating plate.
Never use defective power cords. Defective
power cords and plugs must be replaced by
authorised personnel.
27
Should an extension cord be used, check its
perfect condition. The extension cord must have
a minimum section of 1,5 mm
2
or 16 AWG and
must be supplied with a three-pole plug/socket.
Starting and use
Danger!
Electric voltage may cause death.
Electrical parts should never be in
contact with water: danger of short-
circuit. Overheated steam and hot
water may cause burns! Do not direct
steam or water jet towards the body;
furthermore, great attention must be
given when touching either the dis-
pensing tube or the heating plate:
danger of burns!
For your own safety as well as for other
people safety, keep to the safety pre-
cautions described on page 29.
Never use the machine without water and
coffee beans.
Remove the cleaning brush and the central unit
key from the coffee grounds container (
1 ) and
keep them within reach.
Unwind the power cord ( 19 ) from the rear side
of the machine.
29
Coffee bean container ( 11 ) is attached with
two screws. Remove the cover ( 12 ) and fill it
with coffee beans (approx. 300 g), then re-
place the cover. Adjust grinding by means of
the grind adjustment lever (
13 ), positioning it
on point “5” of the scale.
28
12
Coffee bean container cover
13
Grind adjustment lever
14
Service door
15
Central unit
16
Filling funnel
17
Handle for inserting and removing
central unit
18
Coffee rest drawer
19
Power cord
20
Control panel with warning lights
21
Main switch
1
Coffee grounds container
2
Drip tray
3
Cup holder grill
4
Coffee dispensing unit (removable)
5
Steam/hot water dispensing tube with
heat protector
6
Steam/hot water selection knob
7
Cup heating plate
8
Water tank
9
Water tank cover
10
Automatic water tank valve
11
Coffee bean container
22 Main switch warning light
23
Coffee selection button (1 or 2 cups)
24 Coffee temperature warning light
Temperature warning light on: right work-
ing temperature
Temperature warning light blinking: work-
ing temperature too low
If both temperature warning lights (coffee
and steam) are blinking at the same time:
working temperature too high; carry out
drainage
25 Steam selection button
26 Steam temperature warning light
Temperature warning light on: right work-
ing temperature
Temperature warning light blinking: work-
ing temperature too low
27 Rotating knob for cup fill level
28 Empty water tank and coffee bean con-
tainer warning light
Warning light on: coffee bean container
or water tank empty
After having filled the water tank with cold
water, drain the machine.
Warning light is blinking: coffee bean
container or central unit not correctly
mounted.
Control panel description
IMPORTANT SAFEGUARDS
a) A short power-supply cord (or detachable power-supply cord) is to be provided to
reduce risks resulting from becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and may be
used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cords is used,
1) The marked electrical rating of the detachable power-supply cord or extension cord
should be at least as great as the electrical rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should be a grounding-
type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over.