Saeco CRISTALLO 600, Use And Maintenance

Page: 44 / 64

44
English
8.3.2 Structure of the
maintenance menu
MAINTENANCE ERROR
MESSAGE nn
RESET
ERROR LOG /03
ERROR LOG
ERROR LOG RESET
RINSING CRISTALLO 400
PLEASE WAIT
BOILER COOLING
DRAIN BOILER DRAIN BOILER
>Y< N
STATISTICS TOTAL SALES
0.00
BEVERAGE
0.00
CUP
0.00
DISCOUNT/SURCHARGE
0.00
OVERPAY
0.00
CARD IN
0.00
CARD OUT
0.00
SLAVE VMC
0.00
COUNTERS BEVERAGES 01
TT:00050 PP:00003
CUP COUNTER
TT:00050 PP:00003
FREE
TT:00050 PP:00003
TEST
TT:00050 PP:00003
TOTALE COINS
0.00
TOTALE BANKNOTES
0.00
TOTALE BANKNOTES
BANKNOTE 01 00000
VM CODE
000000
RESET RESET
>Y< N
SOLUBLES
TEST WATER/SOLUBLES
WATER
STEP DOWN COUNTERS RESINS REGENERATION
00150 LIM:00150
RESET
Y >N<
8.3.3 Description of messages in
the maintenance menu
MAINTENANCE
This function enables the display and cancellation of any
errors that may be present. It is also possible to carry out
maintenance on the vending machine.
The errors can be reset through the maintenance menu or
using the Automatic Error Reset mode.
The Automatic Error Reset mode, designed to be used by
non-qualified technical personnel, can be activated without
entering the programming / maintenance menu and
attempts to remove automatically any (non-critical) error
conditions that may occur to the V.M.
This mode does not eliminate all error conditions, but only
those caused by operational faults.
Errors are divided into two groups (faults and failures)
depending on how serious they are and how easy it is to
remove the faults.
Faults include error conditions automatically recovered
following removal of their cause, or conditions requiring
an operator’s intervention which are therefore eliminated
only upon the operator’s request.
Failures, on the contrary, always require technical
intervention by qualified personnel (ved. tab. par. 11.2).
Recommended solutions
In maintenance mode it is possible to:
- start the gear motor of the brew group by pressing
beverage key 1 (Fig. 40);
- start the nozzle arm by pressing beverage key 2 (Fig.
40);
- have the mixer rinsed by pressing beverage key 3 (Fig.
40);
- display total and partial counters for 5 seconds by pressing
beverage key 4 (Fig. 40).
- start the cup release by pressing beverage key 6 (Fig.
40);
- reset errors by pressing beverage key 12 (Fig. 40).