Saeco CRISTALLO 600, Use And Maintenance

Page: 38 / 64

38
English
EXACT CHANGE POLICY
1
MANUAL CHANNEL LOAD
4
CHANNEL LEVEL LOW
MANUAL CHANNEL EMPT.
COMMITTED TO VEND
NO
BANKNOTES ENABLING
BANKNOTE ESCROW
YES
SLAVE ADDRESS
0X40
MAX CREDIT
>20.00<
MULTIVEND
>Y> N
CONTINUES
OVERPAY TIME
180
COUNTRY CODE
0039
SCALE FACTOR
1
DECIMAL POINT POS.
000.00
• Exact change policy: In MDB change-giving
coiners, the condition of no change available can be
selected within the following table:
Key:
L = channel with the lowest coin value below the minimum level
M = channel with the medium-low coin value below the minimum level
HL
= channel with the medium-high coin value below the minimum level
HH
= channel with the highest coin value below the minimum level
No. Description
0 L or M or HL or HH
1 L or M
2 HL or HH
3 L or HH
4 L
5 M
6 HL
7 L and HH
8 HL and HH
9 L and M
10 L and M and HL and HH
11 L and HL or L and HH
12 L or HL and HH
13 HH
14 L and M and HL
15 Never (change always available)
Note
Even if the no change available message is displayed,
the vending machine continues to give change as long
as coins are present in the channels. The minimum level
(same for all channels) can be set on a special menu
item.
• Channel level low: Enables setting of the minimum
number of coins in the channels. Default = 4.
• Manual channel load: Allows the change-giving
coiner channels to be filled manually. Press Esc to exit
the channel loading mode.
• Manual channel empt.:
Allows the change-giving
coiner channels to be emptied by pressing the beverage
selection keys.
• Committed to vend: By setting “N”, the credit
inserted can be returned even if no sale has been made.
This function may be useful, for example, for changing
banknotes into coins. By setting “Y”, the credit inserted
can be returned as change only after the sale has been
completed. Default = YES.
• Banknotes enabling:
Enables selection of which
banknotes will be accepted by the MDB banknote reader.
A specific banknote is enabled for acceptance by setting
“Y”. On the contrary, the “N” setting prevents the
banknote reader from accepting a specific banknote.
Default = All enabled.
• Banknote escrow: By setting “Y”, an inserted
banknote is stored in the escrow position by the banknote
reader (if supported); this function is supported by the
banknote reader. In this way, if the sale fails or the card
system fails to charge, the banknote will be returned.
By setting “N”, any inserted banknote goes to the
banknote reader’s stacker, so that the banknotes cannot
be returned. Default = No.
• Slave Address:
When the vending machine is in
Master mode, this menu enables setting of the address
of any slave connected vending machine. If the vending
machine is in Slave mode, it enables setting of its address.
Possible addresses are 0x40, 0x48 and 0x50. Default
= 0x40.
- Max credit
This allows the user to set the maximum credit which
can be accepted by the vending machine. Once this limit
has been reached, the payment systems are disabled so
that no more credit can be accepted. Default = 20.00.
- Multivend
Enables the user to use any residual credit to purchase
other beverages. By setting “N” (no), the residual credit
will be collected by the vending machine.
- Overpay Time
It establishes the maximum time (expressed in seconds)
beyond which the vending machine collects the displayed
residual credit. The time is adjustable at intervals of 10
seconds. By setting “000” the function is disabled.
- Country Code (“CM”)
Enables to set the country code, which corresponds to
the international dialling code (E.g. ITALY = 0039).
- Scale factor
Enables setting of the number of fixed zeros of the credit.
- Decimal point posit.
Enables setting of the position of the decimal point of the
credit.