Sabo 38-EV, Operator'S Manual, Page: 51 / 86

7
GB
– before you eliminate jams or blockages in the ejection channel;
– when you hit a foreign body;
– if the machine starts to vibrate strangely.
• If a foreign object has been encountered or if the machine becomes blocked, e.g. by driving onto an obstacle, a
specialist dealer must check whether parts of the machine have been damaged or deformed. Any necessary repairs
must also be carried out by an authorized specialist workshop.
• If you notice unusually strong vibrations in your machine, you must have it checked by an authorized dealer.
Switch the motor off and ensure that all moving parts have come to a complete standstill,
– when lifting or tilting the machine, e.g. for transport;
– when transporting the machine to and from the working area;
– when moving the machine off the lawn;
– if leaving the machine for any time;
– when setting the scarifying depth;
– before removing the collector bag.
Maintenance and storage
• Ensure that all screws have been tightened securely and that the machine is in a safe working condition.
The ejection flap must only be opened and the grass collector removed when the motor is turned off.
Always check the grass collector at regular intervals for wear and tear or loss of function.
Check the condition and firm seating of the blade shaft before using the machine. Worn or damaged blades
must be replaced immediately.
Always have the replacement of the blades carried out by an authorized workshop, since an insulation
protection test to DIN EN 60335 must be carried out after repair and maintenance work to insulation
components (e.g. blade shaft, attachment fittings).
• For reasons of safety, always replace worn or damaged parts.
Protective gloves must be worn at all times during maintenance and cleaning work.
Maintenance and cleaning work must only be performed when the motor has been switched off and the plug has
been pulled out of the socket.
Do not clean the machine with running water or pressure cleaners. This could damage the electrical system.
For warranty and safety reasons, original replacement parts must be used at all times.
• Notes for Switzerland:
Electric appliances must only be operated if a residual current operated device with a maximum breaking current of 30
mA is also integrated into the circuit.
• Notes for Austria:
The socket coupler of the connecting cable must be splashproof.
6 DESCRIPTION OF COMPONENTS
1 Cable connection plug
2 Actuating grip for motor (safety grip)
3 Cover for electric motor
4 Belt cover
5 Adjusting screw scarifying depth
6 Ejection flap
7 Strain relief device for electric cable
8 Adjusting rod
9 Lever for lowering/raising the blade shaft
10 Locking button (red)