Saab 2002 9-5 2.3 Turbo Ecopower Owner'S Manual Download Page 212

Page: 212 / 272

212

Car care and technical information

Reassembly:

1 Align the fastener with the hole in the

body.

2 Press the lamp unit home into the body

until you hear a click.

3 Fit the screws and cover.

Loading lighting, 9-5 Wagon

1 Pull down the glass cover at the outer

edge.

2 Bend one of the contacts so that the

bulb can be removed.

3 Change the bulb.

On refitting, insert the connector-end of the
lamp fitting first.

License-plate light

1 Undo the two screws and remove the

lamp glass.

2 Withdraw the bulb.
3 Change the bulb.
4 Check the seal before fitting the glass.

IB1335

IB520

IB1919

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

















































































































































































































































































Search results

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

Reviews:

Related manuals for 2002 9-5 2.3 Turbo Ecopower

Brands by name

Popular brands

Saab 2002 9-5 2.3 Turbo Ecopower, Owner'S Manual

Search results

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

Reviews:

Related manuals for 2002 9-5 2.3 Turbo Ecopower

Brands by name

Popular brands