Saab 2002 9-5 2.3 Turbo Ecopower Owner'S Manual Download Page 172 | Manualshive

Page: 172 / 272

background image

172

Starting and driving

• Check the anti-freeze in the engine cool-

ant, see page 196.

The car´s trip computer will warn you when
there is a risk of slippery conditions. For fur-
ther information on this function, see page
60.
The car is equipped with tires designed to
provide optimum grip on both wet and dry
roads, although this has been achieved at
the expense of somewhat reduced grip on
snow and ice. For regular driving on snow
and ice, we therefore recommend that
winter (snow) tires be fitted.
Winter (snow) tires, particularly studded
tires (where use is legally permitted), gener-
ally make driving safer on snow and ice.
Acquaint yourself with the legal provi-
sions governing the use of different
types of winter tires and snow chains.
Studded tires are not allowed in some
countries.

If winter tires are fitted, the same type must
be fitted on all wheels. Your Saab dealer will
be pleased to advise you on the best tires for
your car.
Remember that tires age. It may therefore
be necessary to change them before they
reach the legal wear limit, as they gradually
lose their friction properties.
The best response if the car gets into a
front-wheel skid is to freewheel (manual
gearbox only), i.e. disengage the clutch (so
that the wheels are neither driven or
retarded by the engine.
If the car has automatic transmission, ease
up on the accelerator and steer carefully in
the desired direction.
In a rear-wheel skid, steer in the same direc-
tion that the rear of the car is moving.

Tire chains

If you want to fit tire chains (where legally
permitted) they should only be fitted to the
tires recommended under ”Specifications”
(see page 256).
Consult your Saab dealer for details of
approved tire chains.

WARNING

• Do not exceed 30 mph (50 km/h)

when tire chains are fitted.

• Tire chains can reduce the directional

stability of the car.

• Tire chains must not be used on the

rear wheels.

NOTE

• Check the links frequently for wear.

• Check that the chains do not contact

the wheel-arch liner at full lock.

• See section ”Specifications”, page

256, for information on allowable
wheel dimensions for the fitting of tire
chains.

«
...
170
171
172
173
174
...
»

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

















































































































































































































































































Reviews:

No comments

Related manuals for 2002 9-5 2.3 Turbo Ecopower

Brand: Westin Pages: 3

Brand: Vauxhall Pages: 323

Brand: FORM FIT Pages: 2

Edge Flush Rail

Brand: Thule Pages: 12

Brand: PEUGEOT Pages: 249

Brand: GMC Pages: 20

Brand: Maserati Pages: 210

Brand: OnStar Pages: 22

Brand: iArmor Pages: 4

Truck Training Model

Brand: WABCO Pages: 56

Brand: Cadillac Pages: 409

Brand: Fortin Pages: 9

Brand: rough country Pages: 4

Brand: Thule Pages: 8

Brand: EUFAB Pages: 12

Brand: PERODUA Pages: 43

Camry Hybrid 2012

Brand: Toyota Pages: 62

CommCenter 300MB-SD

Brand: Federal Signal Corporation Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands