manualshive.com logo in svg

Saab 2002 9-5 2.3 Turbo Ecopower, Owner'S Manual

The Saab 2002 9-5 2.3 Turbo Ecopower is a powerful and efficient vehicle that embodies Scandinavian design and engineering. Ensure that you have a comprehensive understanding of every feature and functionality by downloading the free Owner's Manual from manualshive.com today, making maintenance and operation a breeze.

Share
Download
background image

163

Starting and driving

SPORT and WINTER modes

To select Sport mode, press the ”S” button on 
the selector lever when the selector lever is in 
position N, D, 4, 3 or L. 
In this mode, gear changes will take place at 
higher engine speeds than in Normal mode, in 
other words, the transmission will change up 
later and change down earlier for the same throt-
tle (accelerator) position. 
The Sport mode will be deselected if: 

• The S button is pressed.
• The selector lever is moved to position P or R.
• The engine is switched off.
• The Winter mode is selected.

• ”Automatic transmission, fault indicator” 

 

appears on main instrument panel, see page 
159.

The Winter mode facilitates pulling away and 
driving on icy roads. Third gear is selected auto-
matically for pulling away to reduce wheelspin.
Winter mode can be selected when the engine 
is running by pressing the ”W” button on the 
selector-lever surround. It cannot be selected 
when the selector lever is in position L. 
Note: It is still possible to use kick-down in the 
Winter mode, in which case a change-down to 
1st or 2nd will take place. 
The Winter mode will be deselected if: 

• The W button is pressed.
• The engine is switched off.
• The selector lever is moved to position L.
• The automatic-transmission fluid overheats.

• ”Automatic transmission, fault indicator” 

 

appears on main instrument panel, see page 
159.

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

















































































































































































































































































Reviews:

No comments

Related manuals for 2002 9-5 2.3 Turbo Ecopower

Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Meritor 93000 Service Service Manual preview
93000 Service
Brand: Meritor Pages: 20
Stealthbox SB-J-GCHER2/10W3v2 Installation Manual preview
SB-J-GCHER2/10W3v2
Brand: Stealthbox Pages: 2
Fleetwood Bounder turbo diesel 2001 Instructions Manual preview
Bounder turbo diesel 2001
Brand: Fleetwood Pages: 166
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394
Erich Jaeger 735229 Installation Instructions Manual preview
735229
Brand: Erich Jaeger Pages: 16
Diono easy view XXL Instructions Manual preview
easy view XXL
Brand: Diono Pages: 9
XPENG P7 2023 User Manual preview
P7 2023
Brand: XPENG Pages: 316
AEM 21-5011 Installation Manuallines preview
21-5011
Brand: AEM Pages: 5
CEMO DT-Mobil Easy 200 L Original Operating Instructions preview
DT-Mobil Easy 200 L
Brand: CEMO Pages: 80
Toyota 2005 ECHO User Manual preview
2005 ECHO
Brand: Toyota Pages: 433
Dodge 2010 Ram 2500 Heavy Duty Buyer'S Manual preview
2010 Ram 2500 Heavy Duty
Brand: Dodge Pages: 15

Brands by name

Popular brands

Load more brands