manualshive.com logo in svg

Saab 2002 9-5 2.3 Turbo Ecopower, Owner'S Manual

The Saab 2002 9-5 2.3 Turbo Ecopower is a powerful and efficient vehicle that embodies Scandinavian design and engineering. Ensure that you have a comprehensive understanding of every feature and functionality by downloading the free Owner's Manual from manualshive.com today, making maintenance and operation a breeze.

Share
Download
background image

191

Car care and technical information

Engine families

Saab cars imported into the United States 
and Canada meet all applicable emission 
control standards. The engine family and 
appropriate tune-up specifications are iden-
tified on a label affixed to the left front inner 
fender.
These engine families meet applicable EPA 
Federal Standards, California State Stan-
dards and Canadian Federal Standards and 
are equipped with the following systems:

• Sequential multiport fuel injection system.
• Three way catalytic converter.
• Crankcase emissions control system.
• Evaporative emission control system.
• On-Board diagnostic (OBD II) system.

Emission control 
systems

The systems for controlling emissions to the 
atmosphere require regular checking and 
adjustment at the intervals specified in the 
service program.
In addition to meeting the exhaust emission 
regulations and thereby helping to keep the 
environment clean, a correctly tuned engine 
will also give maximum fuel economy.

Saab Trionic engine management 

system

The Saab Trionic engine management 
system is a unique Saab development that 
combines sequential multiport fuel injection, 
electronic distributorless ignition and turbo-
charger boost pressure control into one sys-
tem.
The Trionic engine control module (ECM) 
monitors many different engine parameters 
such as: 

• Intake manifold pressure.
• Intake air temperature.
• Crankshaft position.
• Engine coolant temperature.
• Throttle position and
• The oxygen content of the exhaust gases.
The ECM receives information regarding 
engine knocking from a sophisticated feed-
back function in the ignition discharge unit.
By processing all of this information, the Tri-
onic system can control fuel injector open-

ing duration, ignition timing and turbo-
charger boost pressure to provide excellent 
engine performance while maintaining low 
emissions and fuel consumption.

NOTE

The Trionic engine management systems 
continuously monitors the operation of 
these systems and have on-board diag-
nostic capabilities (OBD II). 

If the ”Engine malfunction (CHECK 

ENGINE)” lamp 

 in the main instru-

ment illuminates, this indicates that the 
Trionic ECM has detected a problem. The 
car will continue to operate, but perfor-
mance may be diminished. You should 
have your car checked by a Saab dealer 
as soon as possible.

Summary of Contents for 2002 9-5 2.3 Turbo Ecopower

















































































































































































































































































Reviews:

No comments

Related manuals for 2002 9-5 2.3 Turbo Ecopower

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
BMW 01 29 9 416 497 Installation Instructions preview
01 29 9 416 497
Brand: BMW Pages: 5
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110

Brands by name

Popular brands

Load more brands