SA-4W-REPEATER
User Manual
S-Access GmbH
Tel: +41 44 700 31 11
Oberhausenstrasse 47
Page
25
of
26
Fax: +41 44 700 31 03
8907 Wettswil a/A
Email:
Switzerland
WEB:
www.s-access.ch
11 TECHNICAL SPECIFICATION
11.1 Interfaces
11.1.1 xDSL Line Interface
Specification
ITU-T G.SHDSL, Rec G.991.2
Option
4-wire Interface (separate Tx and Rx Pairs)
Line Code
TC-PAM
Impedance 135
Transmit Power
13.5 dBm @ 135
Ω
Number of Pairs
1 or 2 (option: 2 or 4)
Bit Rate
192 to 2064 kbps
Connector Type
RJ-45, 8 pin
Overvoltage Protection
ITU-T Rec. K.20/K.21
Specification
ITU-T G.SHDSL, Rec G.991.2
Wetting Current
2-4 mA @ 60 V
11.1.2 Monitor Interface
Specification
EIA-232 / V.28
Data Rate
9600 baud, asynchronous
Protocol
8 bit, no parity, 1 stop bit no linefeed with carriage return
XON/XOFF enabled
Signal Level
V.28 on DB9 female connector
Connector Type
DB9 female connector
11.2 Power Supply
Specification
ETSI ETS 300 132-2
Plug-in
2 x 40V/60V
DC
over backpanel (redundant)
Tabletop
1 x 48Vdc (36-72V
DC)
over Molex type safety approved
connector or
38..200Vdc over xDSL
11.3 Environmental
11.3.1 Climatic Conditions
Storage:
ETS 300 019-1-1 Class 1.2
(-25
°
C … +55
°
C)
Transportation:
ETS 300 019-1-2 Class 2.3
(-40
°
C … +70
°
C)
Operation:
ETS 300 019-1-3 Class 3.2
(-5
°
C … +45
°
C)
11.3.2 Safety / EMC
According to EN60950 / EN55022, Class B
11.4 Physical Dimensions and Weight
IP:
Dimensions: 300(W)x166(D)x65(H) mm
Weight:
2.5 kg
