background image

7 - English

FEATURES

PRODUCT SPECIFICATIONS

Orbit Diameter .........................................................1/16 in.
Size of Paper ....................................................... 1/3 Sheet
Paper Type ................................ Non-Adhesive Sandpaper
   

Adhesive Sandpaper

kNOW yOUR SANDER

See Figure 1, page 11.

The safe use of this product requires an understanding of 
the information on the product and in this operator’s manual 
as well as a knowledge of the project you are attempting. 
Before  use  of  this  product,  familiarize  yourself  with  all  
operating features and safety rules.

CUSHION

The cushion of the sander accepts both standard and pres-
sure sensitive adhesive sandpaper. 

DUST COLLECTION

The sander has a built-in dust collection for maximum com-
fort and control, longer life, and to help keep the work area 
clean. A 1-1/4 in. vacuum hose adaptor is also provided for 
attaching to a vacuum cleaner.

PAPER CLAMP

The sander has two paper clamps designed to secure stan-
dard sandpaper to the platen.  

SWITCH

The sander has a conveniently located sealed slide switch 
to keep out dust for longer life. 

No Load Speed ...................................12,000 r/min. (RPM)
Input ................................... 120 V, 60 Hz, AC only, 2 Amps
Net Weight .................................................................. 4 lbs. 
Vacuum hose adaptor ........................................... 1-1/4 in.

ASSEMBLy

UNPACkING

This product has been shipped completely assembled.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

WARNING: 

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
could result in serious personal injury.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-525-2579 for assistance.

PACkING LIST

1/3 Sheet Sander
Sanding Sheet
Dust Bag
Vacuum Hose Adaptor
Operator’s Manual

WARNING: 

If  any  parts  are  damaged  or  missing  do  not  operate   
this  product  until  the  parts  are  replaced.  Use  of  this 
product with damaged or missing parts could result in 
serious personal injury.

WARNING:

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in  a  hazardous  condition  leading  to  possible  serious 
personal injury.

WARNING:

Do  not  connect  to  power  supply  until  assembly  is 
complete.  Failure  to  comply  could  result  in  accidental 
starting and possible serious personal injury.

Summary of Contents for S630D

































Reviews: