background image

Ce bloc-moteur a été conçu et fabriqué conformément à nos 
strictes normes de fiabilité, simplicité d’emploi et sécurité 
d’utilisation. Correctement entretenu, cet outil vous donnera des 
années de fonctionnement robuste et sans problème.

AVERTISSEMENT :

 

Pour réduire les risques de 

blessures, l’utilisateur doit lire et veiller à bien comprendre le 
manuel d’utilisation avant d’employer ce produit. 

Merci de votre achat.

Su cabezal motor ha sido diseñado y fabricado de conformidad con 
nuestras estrictas normas para brindar fiabilidad, facilidad de uso 
y seguridad para el operador. Con el debido cuidado, le brindará 
muchos años de sólido funcionamiento y sin problemas.

ADVERTENCIA: 

Para reducir el riesgo de lesiones, 

el usuario debe leer y comprender el manual del operador antes 
de usar este producto. 

Le agradecemos su compra.

Your power head has been engineered and manufactured to our high standard for dependability, ease of operation, and 
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING:

 

To reduce the risk of injury, the user must read and understand the operator’s manual before using  

this product. 

Thank you for your purchase.

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

CONSERVER CE MANUEL POUR 

FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL PARA 

 FUTURAS  CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

30

cc

 4-CYCLE POWER HEAD 

 

BLOC-MOTEUR 4-TEMPS DE 30 

cc

CABEZAL MOTOR DE CUATRO TIEMPOS 30 

cc

RY34001

ALL VERSIONS

TOUTES LES VERSIONS
TODAS LAS VERSIONES

To register your Ryobi 

product, please visit:  

http://register.ryobitools.com/ 

Pour enregistrer votre produit de 

Ryobi, s’il vous plaît la visite:

http://register.ryobitools.com/ 

Para registrar su producto de 

Ryobi, por favor visita: 

http://register.ryobitools.com/ 

Summary of Contents for RY34000















































Reviews: