background image

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

18 V CUT-OFF TOOL/GRINDER

OUTIL À TRONÇONNER/MEULEUSE DE 18 V
HERRAMIENTA DE CORTE/AMOLADORA DE 18 V

P423

WARNING:

 

To reduce the 

risk of injury, the user must read and 

understand the operator’s manual 

before using this product.

ADVERTENCIA:

 

Para reducir 

el riesgo de lesiones, el usuario debe leer 
y comprender el manual del operador 
antes de usar este producto. 

AVERTISSEMENT : 

Pour 

réduire les risques de blessures, 

l’utilisateur doit lire et veiller à bien 

comprendre le manuel d’utilisation avant 

d’employer ce produit.  

INCLUDES: 

Cut-Off Tool/Grinder, Side 

Handle/Wrench, Grinding Wheel Guard, 
Grinding Wheel,  Cutting Wheel Guard, 
Cutting Wheel, Operator’s Manual

TABLE OF CONTENTS

****************

 General Power Tool  

Safety Warnings ..............................2-3

 Cut-Off Tool/Grinder  

Safety Warnings ..............................3-5

 

Symbols ..............................................6

 

Features ..............................................7



 Assembly .........................................7-8

 Operation .......................................9-11

 Maintenance .....................................11

 Illustrations ..................................12-14

 Parts Ordering  

and Service .........................Back page

INCLUT : 

outil à tronçonner/meuleuse, 

poignée latérale/llave, garde-meule à 
meuler, muela, garde-meule à tronçonner, 
tronçonneuse, manual del operator

TABLE DES MATIÈRES

****************

 Avertissements  de sécurité générales 

relatives aux outils électriques ........2-3

 Avertissements de sécurité relatifs  

au outil à tronçonner/meuleuse ......3-5

 

Symboles ............................................6

 

Caractéristiques .................................7



 Assemblage .....................................7-8

 Utilisation  ......................................9-11

 Entretien ...........................................11

 Illustrations ..................................12-14

 Commande de pièces  

et dépannage ....................Page arrière

INCLUYE:

 herramienta de corte/amoladora, 

mango lateral/llave, protección del disco 
de esmerilado, disco de esmerilado, 
protección del disco de corte, disco de 
corte, manual del operador

ÍNDICE DE CONTENIDO

****************

  Advertencias de seguridad  

para herramientas eléctrica ........... 2-3

  Advertencias de seguridad para 

herramienta de corte/amoladora ... 3-5



 

Símbolos ............................................6



 

Características ...................................7



 Armado .......................................... 7-8

 Funcionamiento ........................... 9-11

 Mantenimiento .................................11

 Illustraciones .............................. 12-14



  Pedidos de piezas  

y servicio .......................Pág. posterior

SAVE THIS MANUAL FOR 

FUTURE REFERENCE

GUARDE ESTE MANUAL 

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL 

POUR FUTURE RÉFÉRENCE

Summary of Contents for P423





































Reviews: