background image

4 — English

MULTI-TOOL SAFETY WARNINGS

 

Do not charge battery tool in a damp or wet location. 
Do not use, store, or charge battery packs or products 
in locations where the temperature is less than 50°F or 
more than 100°F. 

Do not store outside or in vehicles

 

Under extreme usage or temperature conditions, battery 
leakage may occur. If liquid comes in contact with your 
skin, wash immediately with soap and water. If liquid 

gets into your eyes, flush them with clean water for at 
least 10 minutes, then seek immediate medical attention. 

Following this rule will reduce the risk of serious personal 
injury.

 

Save these instructions. 

Refer to them frequently and use 

them to instruct others who may use this tool. If you loan 
someone this tool, loan them these instructions also.

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

Safety Alert

Indicates a potential personal injury hazard.

Read Operator’s  
Manual

To reduce the risk of injury, user must read and understand operator’s manual 
before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply with ANSI 
Z87.1. 

Wet Conditions 
Alert

Do not expose to rain or use in damp locations.

Recycle Symbol

This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws 
may prohibit disposal of batteries in ordinary trash. Consult your local waste 
authority for information  regarding available recycling and/or disposal options.

V

Volts

Voltage

min

Minutes

Time

Direct Current

Type or a characteristic of current

no

No Load Speed

Rotational speed, at no load

.../min

Per Minute

Revolutions, strokes, surface speed, oscillations etc., per minute

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates a hazardous situation, which, if not avoided, will result in death or 
serious injury.

WARNING:

Indicates a hazardous situation, which, if not avoided, could result in death or 
serious injury.

CAUTION:

Indicates a hazardous situation, that, if not avoided, may result in minor or 
moderate injury.

NOTICE

:

(Without Safety Alert Symbol) Indicates information considered important, but 
not related to a potential injury (e.g. messages relating to property damage).

Summary of Contents for P343

























Reviews: