background image

5 — English

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates a hazardous situation, which, if not avoided, will result in death or 

serious injury.

WARNING:

Indicates a hazardous situation, which, if not avoided, could result in death or 

serious injury.

CAUTION:

Indicates a hazardous situation, that, if not avoided, may result in minor or 

moderate injury. 

NOTICE:

(Without Safety Alert Symbol) Indicates information considered important, but 

not related to a potential injury (e.g. messages relating to property damage).

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper 
interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

Safety Alert

Indicates a potential personal injury hazard.

Read Operator’s  

Manual

To reduce the risk of injury, user must read and understand operator’s 

manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply with 

ANSI Z87.1.

Wet Conditions Alert

Do not expose battery, battery compartment, or electronic components 

to rain, water, or liquids. Do not charge battery or expose product to 

rain or damp locations.

Rain Symbol

Do not expose to rain.

Keep Bystanders 

Away

Keep all bystanders at least 50 ft. away.

Ricochet

Thrown objects can ricochet and result in personal injury or property 

damage.

 

No Hands Symbol

Failure to keep your hands away from the blade will result in serious 

personal injury.

 

Recycle Symbol

This product uses lithium-ion (Li-ion) batteries. Local, state, or federal 

laws may prohibit disposal of batteries in ordinary trash. Consult your 

local waste authority for information regarding available recycling and/

or disposal options.

Direct Current

Type or a characteristic of current

no

No Load Speed

Rotational speed, at no load

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

V

Volts

Voltage

Hz

Hertz

Frequency (cycles per second)

min

Minutes

Time

Summary of Contents for P2907































Reviews: