background image

6 — English

FEATURES

PRODUCT SPECIFICATIONS

Motor ..................................................................18 Volt DC
Cutting Capacity...................................................... 5/16 in.
Blade Length ................................................................ 8 in.

Switch .............................................................Single Speed 
No Load Speed ....................................... 1,200/min. (RPM)

KNOW YOUR SHRUBBER

See Figure 1.

The safe use of this product requires an understanding of the 
information on the product and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before 
use of this product, familiarize yourself with all operating 
features and safety rules.

BLADE

The shrubber comes with an 8 in. shrubber blade that can 
be used on shrubs.

LOCK-OUT BUTTON

Your tool is equipped with a lock-out button which reduces 
the possibility of accidental starting. The lock-out button 
is located on the handle above the switch trigger. You can 
depress the lock-out button from either the left or right side.

SCABBARD

The scabbard keep the operator from coming in contact 
with the sharp blades when the tool is not in use. They also 
help keep the blades from being nicked or damaged when 
the tool is in storage.

SWITCH TRIGGER

The switch trigger activates the motor and blades when it is 
depressed and the lock-out button is pushed.

TOOLLESS BLADE CHANGE SYSTEM  

Your shrubber has a toolless blade change system that does 
not require the use of a tool (blade wrench) when installing 
or removing the blades.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

 WARNING:

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
could result in serious personal injury.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have carefully 

inspected and satisfactorily operated the product.

  If any parts are damaged or missing, please call 

1-800-860-4050 for assistance.

PACKING LIST

Shrubber
Scabbard
Shrubber Blade
Operator’s Manual

 WARNING:

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Use of this product 
with damaged or missing parts could result in serious 
personal injury.

Summary of Contents for P2907































Reviews: